产品说明:
本品提供一层超薄软膜,不硬化,在高温度环境下发挥极佳之排水及防锈功能,防指纹,柔软薄膜不会防凝精密装配,含莹光剂,方便辨认施涂表面。除适用于精密零件及塑胶模具,防锈膜在注塑过程中自动清除,但在使用之精洗模具,有更佳的效果。 用法:
用手指垂直按下喷咀顶部,并距待喷部位20厘米左右的距离喷射。 注意:
1.本品可燃,使用时远离火源,避免阳光直射。
2.应贮放在50℃以下阴凉干燥处。
3.用后空罐勿投入火中。 LONG PROTECTIVE SPRAY
This product provides an ultra-thin filmwhich rmains soft andpliadle giving complete
corrosion protection in conditions of high humidity,Contains a fugitive green dye
to idetify treated su-rfaces.lt is also widely used in fhe plastic injection moukling
in-dustry for-both long-term and short-term protection of moulds.lt is capable of
being moulded off without cleaning. DIRECTIONS:
Hold dispenser approximatel 20 cm from mould Press button downward to spray CAUTION:
1.Do not spray on people or near fire.
2.This product should be stored in environment with temperature below 50℃
3.Do not throw used empty can into fire.
产品说明 防锈喷剂提供一层超薄的白色软膜。在潮湿的环境下提供理想的防锈及排水功能。本产品广泛用于塑胶模具工业,特别适合生产,运送及各种机械。防锈膜在注塑过程中自动清除,但在使用之前清洗模具,会有佳的效果。 使用方法:
用时把罐摇匀,从相距15-30厘米均匀地喷涂在需要防锈的部位上,喷涂一次已足够产生保护功效,如对施涂位置旁的非金属物质有怀疑,如漆面、塑料及其他弹性体。请先试验其相溶性。 注意:
缩容器、含丁烷,高度易燃压缩气体,应存放在通风的地方,避免阳光直接照射或暴露于超过摄氏五十度的环境中,切勿近火,不准吸烟,使用时确保空气流通,避免眼睛沾及,吸入或吞食后对人体有害用完后不戳破焚烧空罐,本产品只供工业用途。远离儿半童解及的地方。
Songyang Rust White White Specially formulated to provide complete corrosion prote
ction in canditions of highhumidity.lt is widelly uset in the plastie injection mouding
by Rust Guard is alm ost dry and contains a fugitivewhite dyeto identify treated surfacesl.ln
most appliations it is capable of being moulded offwit hout cleaning. DIRECTIONS FOR USE:
Shake can well and spray from a distance of 15-30cm evenly over area to be prote-cted.One
pass usually provides sufficientprotection.lt is recommended to test co-mpatibility
with painted or coated suraces,plastics,rubbers and other elastomers prior ro use. CAUTION:
Pressurized comtainer,Contains butane.Extremely flammable liquefiedgas.Keep container
in well-ventilated place,Protect from sumlight and do not expose to temp-eratures
exceeding 50℃.Keepaway fron sources of ignition-no smoking.Ensure abequate ventilation
when spra-ying.And do not use near naked flames.A void contact with cyes,Harmful by
inhalation amd if swallowed.Do not puncture or inciner ate aerosol even when empty.For
industrial use only
KEEP OUT OF REACH OF CHILDREN